How Do I Know The Load Range Of My Tires?

What load rating is 10 ply?

Light Truck TiresLT-Metric, LT-Flotation and LT-Numeric Light Truck TiresLoad RangePly RatingMaximum Load Pressure ≤ 295mm / 11.5″ wideD865 psi (450 kPa)***E1080 psi (550 kPa)***F1295 psi (650 kPa)***3 more rows.

Is Load Range E good for towing?

LT-series tires support the higher air pressures that are common for towing. At a minimum, Load Range E tires are capable of safely supporting about 3,000 pounds. So, in the case of a dualie (six wheels), the tires collectively will provide more than sufficient grip for safely towing 18,000 pounds.

What rating is a 14 ply tire?

What is meant by “Ply Rating?”Ply RatingLoad Range10E12F14G16H6 more rows

Are 10 ply tires more puncture resistant?

Generally speaking, the greater the load rating the thicker the tire, with more plies. So you could imply that it would be more puncture resistant,simply because it is thicker.

What does the R or D mean in a tire size?

radial tire constructionThe D indicates that the tire is a diagonal bias ply construction and the R indicates that the tire is a radial tire construction. Beyond the size and type, there are load ranges for tires. Most trailer tires are load range B, C or D.

How can you tell if a tire is 10 ply?

These numbers (or letters) are branded on the side of a tire’s sidewall and they identify how much load the tire can safely carry at a specified inflation pressure. Here’s why it can be confusing: A modern tire with a 10-ply rating doesn’t necessarily have 10 actual plies in it.

Is a 10 ply tire better than a 4 ply tire?

10 ply tires are much tougher than 4 ply and are typically used on trailers and trucks that will be hauling heavy material.

What does LT mean on a tire?

If a tire size reads, LT235/75R15 104/101S, the LT indicates that this tire is meant for Light Truck use. These tires are made for light-duty and heavy-duty pickup trucks (typically ½ ton, ¾ ton, or 1-ton load capacity), SUVs and vans.

What is load range?

Tires with a higher load range can carry heavier loads. … Therefore, load range simply defines the tire’s toughness and maximum allowable air pressure, as opposed to specific information about the actual plies being used. For example, a “C” load range indicates that a tire is equivalent to a 6-ply construction tire.

Is Load Range D or E better?

Expert Reply: Load range D has a capacity of 1,220 lbs at 65 psi, whereas load range E has a capacity of 1,520 lbs at 80 psi. Basically the only difference between the two is the weight capacity.

How much weight can a Load Range E tire carry?

The Load Range C BFGoodrich tire (manufactured by Michelin) is rated at 2,470 at 50 psi and weighs 44 pounds, while the same tire in Load Range E is rated at 3,195 pounds at 80 psi and weighs 52 pounds….Common Light Truck (LT) Load Ranges.Load RangeMax Load Pressure (psi)E80F952 more rows•Nov 11, 2016

Will 10 ply tires last longer?

most 10 ply tires have a harder rubber compound and will last longer than a 6 ply tire.

Can you use a tire with a higher load index?

A tire load index tells you how much weight a tire can carry at its maximum air pressure. … If you’re thinking about up-sizing, you can switch to a tire with a higher load index, because that means your tire will safely be able to carry more weight. But you can never go down.

Is Max load rating a tire?

In other words, it’s the amount of weight your tire can support safely. For example, if a tire has a load index of 92, it can support 1,389 pounds at maximum air pressure. Multiply that by four tires (4 x 1,389 = 5,556 pounds) to get your car’s maximum load carrying capacity.

What is the difference between load range F and G?

A different model of tire may need slightly more or less pressure for a given weight, but if it’s the same model of tire, the G will use the same pressure as an F for the same weight.

What is the load index of Load Range E?

Therefore load range simply tells how tough the tire is and the allowable PSI. For example, an “E” load range indicates that a tire is equivalent to a 10-ply construction tire. In realitly, this tire is not built with 10 plies, but rather one or two plies of equivalent strength.

What is Load Range G?

Truck tires typically come in two load ratings: G and H. Load range G is a 14-ply configuration, while load range H tires have 16 plies. … “There’s no room for inflation pressure error with steer tires. They have to be inflated to the proper numbers to run at maximum load-carrying capacity.”

What is a Class E tire?

The load range is identified by a letter of the alphabet, usually from A to F, which represents the ply rating and load pressure. A rating of “E” on the tire means the tire has a ply rating 10 and a load pressure of 80 psi.

Is a LT tire 10 ply?

LT tires are usually 8-ply (Load Range D) or 10-ply (Load Range E). Passenger Tires usually have a 4-ply or 6-ply equivalent sidewall. … This is one of the trade-offs you can expect when you replace a p-metric tire with a LT tire.

Should I get P or LT tires?

Usually, LT tires have deeper tread depths than their P-Metric counterparts. Officially, LT tires should always be replaced with LT tires. P-Metric tires are passenger tires that are better suited for on-road use. … A P-Metric tire should only be considered if the vehicle will only be operated on paved roadways.

What does load range mean on a tire?

The load range indicates the heaviest load the tire can handle in pounds. … The lowest pressure is for B tires with 35 psi, and C has a pressure of 50 psi. The pressures increase in increments of 15 from 65 psi, 80 psi and 95 psi for tires with load ranges of D, E and F.