Is A 4.10 Gear Ratio Good For Towing?

Are 3.73 gears good for highway?

Rear end gears (2.79’s, 3.00’s, 3.25’s, etc) are great for freeway driving, bit not good for 0-60 MPH or accelerating from a dead stop.

Shorter gears (higher numbers) are much better suited for accelerating, such as 3.55, 3.73, 3.91’s, 4.11’s etc.

Always remember, for very “give” there is a “take”..

How fast can you go with 4.10 gears?

With 4.10s…. With stock size tires you can go 150 mph at 5393 rpm in 5th gear. Check out the rpm calculator in the tech section.

Can I tow with a 3.23 gear ratio?

The 2019 Silverado is available with either a 3.23 or 3.42 rear axle ratio. While the 3.23 axle ratio provides both strength and reliability, the 3.42 ratio is what you need for rugged capability and maximum towing capacity. The 3.42 axle ratio is either standard or available through the Max Trailering Package.

How much does it cost to change gear ratio?

As to cost, depending on where it is done, it could cost you as little as 750 dollars to as much as 1500 dollars per axle. Best prices would probably be a performance shop that does it all the time.

Are 3.73 or 4.10 gears better?

Use this rule of thumb: The higher the gear ratio, the easier it is to get the vehicle moving and better accelerating, but lowers top speed. Vice versa, if the gear ratio is lower it has worse acceleration but a higher top speed….WHICH GEAR RATIO IS FOR YOU?3.73 RATIO4.10 RATIOHigher top speedLower top speed3 more rows•May 12, 2020

Are 4.10 gears good for highway?

Installing 4.10 gears improves the car’s performance on the track but with negligible effects to the highway driving. If your car is equipped with an overdrive, you may not even notice a difference in gas mileage with the new higher gearing.

Does higher gear ratio mean faster?

A lower (taller) gear ratio provides a higher top speed, and a higher (shorter) gear ratio provides faster acceleration. . Besides the gears in the transmission, there is also a gear in the rear differential.

Is a 3.42 gear ratio good?

Lower numeric axle ratios may help reduce how much an engine has to work while cruising at highway speeds, and can potentially help improve fuel economy. … For instance, the 3.42:1 ratio included on many Canyon V-6 and Sierra 1500 models offers a good all-around blend.

How does gear ratio affect towing?

The key to understanding gear ratios is to remember that, as the numerical ratio goes up, towing capacity increases but fuel economy goes down. … So, a truck with optional 3.73 gears will tow a heavier trailer than one with 3.55 or 3.21.

Do 4.10 gears make a difference?

Put 4.10:1 gears in the same car, and engine speed increases by 1060 rpm—the difference is 40 rpm per mph with the 3.08s versus 53 rpm per mph for the 4.10s. The greater rate of rpm increase versus road speed provides greater acceleration. … The higher gears will reduce engine rpm versus road speed.

Is 3.42 or 3.73 better?

The difference in towing mpg between the 3.42 and 3.73 gears at highway cruise speed, under the same conditions, should be less than 1 mpg because of the slightly higher rpm running 3.73s. Vehicle speed actually plays a bigger role in fuel economy than engine rpm.

Is a 4.10 gear ratio good?

FACT: A 4.10 axle ratio is ideal for towing heavy loads in a mix of city and highway driving and when towing on varied or steep grades. A 4.10 axle ratio will provide improved acceleration in stop and go city traffic.

Are 4.11 gears good?

4.11:1 is a “lower” gear ratio, meaning you have more torque, lower top speed, and you will generally consume more fuel. Usually people put 4.11:1 gears in trucks to be used off-road for the extra torque and the better “crawling” capabilities.

What gear ratio is best for gas mileage?

The lower the number, the better fuel economy, and the higher the number the more towing power you have, but fuel economy suffers. For instance, a 3:31 gets better fuel economy than a 3:73. On the other hand, a 3:73 or perhaps a 4:10 will tow much more, while fuel economy greatly drops.

What gear ratio do I need for 33 inch tires?

So if our truck had 30-inch tires stock, and a 3.73:1 axle ratio, that calculation would tell us we need a 4.103:1 (which rounds off to the readily available 4.10:1) gear ratio to get us back to stock with 33-inch tires.

How much can a 5.3 L v8 tow?

Its towing capacity is 7,900 pounds. 5.3L V8 Engine: With this available engine, the Chevy Silverado 1500 achieves 355 hp and 383 lb-ft of torque. Towing capacity is elevated to 11,600 pounds. 6.2L V8 Engine: Equipped with this engine, the Chevy Silverado 1500 can tow its maximum of 13,400 pounds (on the RST trim).

What gear ratio is better for towing?

A 3.73 ratio is suitable for regular light towing. If you plan on towing a fifth-wheel trailer or anything heavier than 5,000 pounds, you should consider a 4.1 axle ratio. A 4.1 ratio allows a towing vehicle to start moving without as much throttle.

Are 4.30 gears good for towing?

Higher numerical axle ratios can increase performance when towing heavy loads on steep terrain. … With a 4.30 ratio, it turns 4 1/3rd times for every revolution of the rear wheel. The numerically higher gear ratio (in this case, 4.30) increases wheel torque and improves acceleration from low speeds.

What is the best gear ratio for fishing?

The most common reel on the market has a 6.4:1 gear ratio. This will allow you to work both fast moving presentations as well as slow. However, for certain techniques and applications, a very high or low gear ratio will often work best. For instance, burning a spinnerbait or buzzbait is best done with a 7.1:1 reel.

Does gear ratio affect horsepower?

Motor HP does not change when you change gear ratios. … A dynamometer measures torque and RPM, and from those two values calculates horsepower. When you change gear ratios both RPM and torque will change but horsepower will not.

What is a good gear ratio for a street car?

If it’s a daily driver, chances are you’ll want to keep your gear ratio at 3.23 or below for optimal performance and lower cruising RPMs. For street and strip applications, a popular choice ranges between 3.42s and 3.90s, giving you that extra oomph on the track while maintaining a tolerable cruising RPM on the street.