- Are 3.73 or 4.10 gears better?
- What are 4.11 gears good for?
- Is a 4.10 gear ratio good for towing?
- Is 3.73 a good gear ratio?
- What’s the difference between 4.10 and 4.11 gears?
- Does higher gear ratio mean faster?
- Is 3.42 or 3.73 better?
- Is 3.55 or 3.73 gears better?
- How can you tell if you have 4.10 gears?
- Is it better to have a higher or lower gear ratio?
- What is the best gear ratio for fishing?
- Are 3.73 gears good for highway?
- How fast can you go with 4.10 gears?
- Does VIN number tell gear ratio?
- WHAT WILL 4.10 gears do?
- What is the best gear ratio for a street rod?
- Does gear ratio affect horsepower?
- How much does it cost to install 4.10 gears?
Are 3.73 or 4.10 gears better?
Vice versa, if the gear ratio is lower it has worse acceleration but a higher top speed.
So, by changing your gear ratio, no power levels are being changed, just the torque….WHICH GEAR RATIO IS FOR YOU?3.73 RATIO4.10 RATIOBetter gas mileageWorse gas mileageHigher top speedLower top speed2 more rows•May 12, 2020.
What are 4.11 gears good for?
4.11:1 is a “lower” gear ratio, meaning you have more torque, lower top speed, and you will generally consume more fuel. Usually people put 4.11:1 gears in trucks to be used off-road for the extra torque and the better “crawling” capabilities.
Is a 4.10 gear ratio good for towing?
FACT: A 4.10 axle ratio is ideal for towing heavy loads in a mix of city and highway driving and when towing on varied or steep grades. A 4.10 axle ratio will provide improved acceleration in stop and go city traffic. … A 4.10 rear axle ratio is ideal for towing larger 5th Wheel or Gooseneck trailers.
Is 3.73 a good gear ratio?
A 3.73 ratio is suitable for regular light towing. If you plan on towing a fifth-wheel trailer or anything heavier than 5,000 pounds, you should consider a 4.1 axle ratio. A 4.1 ratio allows a towing vehicle to start moving without as much throttle.
What’s the difference between 4.10 and 4.11 gears?
the difference between 4.10 and 4.11 is that 4.10s have 41 ring gear teeth and 10 pinion teeth. 4.11s have 37 ring gear teeth and 9 pinion teeth. same way that 45 ring gear teeth and 11 pinion teeth will give you 4.09s.
Does higher gear ratio mean faster?
A lower (taller) gear ratio provides a higher top speed, and a higher (shorter) gear ratio provides faster acceleration. . Besides the gears in the transmission, there is also a gear in the rear differential.
Is 3.42 or 3.73 better?
The 3.42 is fine for towing smaller boats, plus you will get better gas mileage for everyday driving. If I were towing frequently on hilly roads, I might would go for the 3.73 for better gas mileage while towing, but the 3.42 should be fine with a 205.
Is 3.55 or 3.73 gears better?
A numerically higher axle ratio provides a mechanical advantage to send more of the engine’s available torque to the rear tires (and front tires, in a four-wheel drive vehicle), but you pay the price at the fuel pump. So, a truck with optional 3.73 gears will tow a heavier trailer than one with 3.55 or 3.21.
How can you tell if you have 4.10 gears?
Jack the car up on jack stands, mark the driveshaft with chalk or a marker. Put car in N and slowly spin the tire 1 full turn while counting how many times the mark on the driveshaft goes around. 4+ a little more is 4.10 gears.
Is it better to have a higher or lower gear ratio?
The gearing ratio is an indicator of the financial risk associated with a company. If a company has too much debt, it can fall into financial distress. A high gearing ratio shows a high proportion of debt to equity, while a low gearing ratio shows the opposite.
What is the best gear ratio for fishing?
The most common reel on the market has a 6.4:1 gear ratio. This will allow you to work both fast moving presentations as well as slow. However, for certain techniques and applications, a very high or low gear ratio will often work best. For instance, burning a spinnerbait or buzzbait is best done with a 7.1:1 reel.
Are 3.73 gears good for highway?
Rear end gears (2.79’s, 3.00’s, 3.25’s, etc) are great for freeway driving, bit not good for 0-60 MPH or accelerating from a dead stop. Shorter gears (higher numbers) are much better suited for accelerating, such as 3.55, 3.73, 3.91’s, 4.11’s etc. Always remember, for very “give” there is a “take”.
How fast can you go with 4.10 gears?
With 4.10s…. With stock size tires you can go 150 mph at 5393 rpm in 5th gear. Check out the rpm calculator in the tech section.
Does VIN number tell gear ratio?
The vehicle identification number (VIN) is a 17-digit code that is used to identify and track every automobile produced. … The codes on that tag will tell you the gear ratio. The VIN will not give you gear ratios in most cases.
WHAT WILL 4.10 gears do?
Installing 4.10 gears improves the car’s performance on the track but with negligible effects to the highway driving. … Switching from a gear set of 3.55 or 3.73 to 4.10 gears will affect your gas mileage slightly as your engine will be turning more times to rotate the rear wheels once.
What is the best gear ratio for a street rod?
If it’s a daily driver, chances are you’ll want to keep your gear ratio at 3.23 or below for optimal performance and lower cruising RPMs. For street and strip applications, a popular choice ranges between 3.42s and 3.90s, giving you that extra oomph on the track while maintaining a tolerable cruising RPM on the street.
Does gear ratio affect horsepower?
Motor HP does not change when you change gear ratios. The only thing that changes is torque. A dynamometer measures torque and RPM, and from those two values calculates horsepower. When you change gear ratios both RPM and torque will change but horsepower will not.
How much does it cost to install 4.10 gears?
Installation costs will vary, but a good rule of thumb is between $250 and $300. Be sure to work with a reliable shop that you trust for installations. You can also save money on your installation labor by having your Trac-Lok rebuilt at the same time as your gears are installed, see drop down option above.