- What cars use 235 65r17 tires?
- Can I put two different size tires on my car?
- What’s the difference between 235 and 255 tires?
- Will a 235 tire fit on a 255 rim?
- Are 225 and 235 tires interchangeable?
- What happens when you put the wrong size tires on a car?
- What do the 3 numbers mean on tire size?
- What does a 225 65r17 fit?
- Can I replace 235 tires with 245?
- What is the difference between a 235 and a 265 tire?
- Which tire is bigger 235 or 255?
- Can I use 225 65r17 instead of 235 60r17?
- What is the difference between 225 65r17 and 235 65r17?
- What does 235 mean in tire size?
- What does the 225 mean in tire size?
- Can I use 235 65r17 instead of 225 65r17?
- Are wider tires better?
- Can I put wider tires on my stock rims?
What cars use 235 65r17 tires?
Tire 235/65R17Acura (1) MDX.Alfa Romeo (1) Stelvio.Audi (1) Q5.BMW (1) X5.Borgward (2) BX7 BX7 TS.Brilliance (1) V6.Cadillac (1) SRX.Chevrolet (1) Captiva Sport.More items…•.
Can I put two different size tires on my car?
Long story short: Yes, it is a problem to have two tires of different sizes on the front (or back) of your car. Having two different-sized tires on the same axle is generally not a good thing. … Sometimes, people choose to put larger tires on the rear axle of their vehicle for handling reasons, cosmetic reasons, etc.
What’s the difference between 235 and 255 tires?
About 1-inch tall is the 255 over the 235. Mpg difference will be about 0, your speedometer will be off the same difference as the height (which will only be a couple of mph at 55). With a good quality tire you may gain slightly better ride.
Will a 235 tire fit on a 255 rim?
In a word, NO. The vehicle was designed for the 255 width tire, and you will lose serious amounts of highway traction with a tire that is 20 mm narrower. … Second thing to do is check the load bearing weight of each tire to see if the 235 is at least equal to the 255.
Are 225 and 235 tires interchangeable?
The major difference …and it might not be that much of a difference …is the wider tire, the 235’s, will also be a bit larger in diameter. … In the case of the 225 vs the 235 the overall tire diameter increases by . 5″. Going with an aspect ratio of 55 on the 235 width tire (235/55r17) you come up with a tire .
What happens when you put the wrong size tires on a car?
When different width tires than recommended are used, the driver may feel the car pull in a certain direction or notice differences in turning and braking, automotive engineer Jeffrey Shaffner says. The most dramatic effect of tire width comes in inclement weather, like snow, he explains.
What do the 3 numbers mean on tire size?
B: TIRE WIDTH The three-digit number following the letter is the tire’s width (from side to side, looking at the tire head on) in millimeters. … In other words, it’s sidewall height divided by tire width. In this example, the aspect ratio is 65, meaning the sidewall is 65 percent as high as the tire is wide.
What does a 225 65r17 fit?
Bridgestone’s 225/65R17 tires are built to fit a wide range of vehicles and are engineered to perform when it matters most. Popular among compact SUVs, mid-size crossovers, and minivans such as the Honda CR-V, Chevrolet Equinox or Toyota RAV4, you can find the best tire for your next adventure here.
Can I replace 235 tires with 245?
plenty of tires that you can select without having to change tire size. The quick answer is yes you can replace 245/50-18 tyres with 235/50-18 but they will have 10mm (0.4 in) smaller overall diameter. Will only slightly effect speedo and odometer – ie speedo will read about 1.5% high.
What is the difference between a 235 and a 265 tire?
The 235 / 75 15 is 235mm wide or about 9.25 inches across the tread. while the 265 is 265mm wide or about 10.43 inches wide. while the 265 / 75 15 is about 30.64 inches diameter. The speedometer will read slower than you are going and the truck will also show less milage than is actually on the truck.
Which tire is bigger 235 or 255?
The 255 looks so much bigger than the 235.
Can I use 225 65r17 instead of 235 60r17?
Both fit 17 inch rims, so one obstacle is out of the way. 235/65R17 has a sidewall height of 153 millimeters (65% of 235 mm), while 225/60R17 has a sidewall height of 135 mm (60% of 225 mm). … You are reducing sidewall height by 18 mm (about 3/4″), so your car will be lower by this amount.
What is the difference between 225 65r17 and 235 65r17?
Going with a 235/65R17 is going to a tire that has a 1.8% larger overall diameter. Your speedometer will be off. If you are looking to improve your corning ability and grip going with a tire that is 10mm wider won’t change a whole lot given that your sidewall is increasing as well resulting in a taller tire.
What does 235 mean in tire size?
The number 235 is the cross-section width in millimeters, while 70 is the ratio of sidewall height to cross-section width (70 percent). R means radial-ply construction and 16 is the wheel diameter, in inches. Load index. This number is based on the weight the tire can safely carry.
What does the 225 mean in tire size?
tire section width225 identifies the tire section width, which is the measurement of the tire from sidewall to sidewall in millimeters. … For example, this aspect ratio of 60 means that the tire’s section height is 60% of the tire’s section width. R indicates the construction used within the tires casing. R stands for radial construction.
Can I use 235 65r17 instead of 225 65r17?
You could, and the 225/65R17 tire will fit your existing rims, but you don’t want to do so. The lesser 225mm width tire offer a narrower tread contact patch, as well as potentially a lesser load carrying capability, depending on model of tire.
Are wider tires better?
From a safety point of view, both types have their good sides: On a dry road, wider tires will offer more grip than narrow ones, but the risk of aquaplaning will be higher with wide tires. – In the winter, narrow tires are better under extreme conditions as they provide higher surface pressure against the road.
Can I put wider tires on my stock rims?
To keep the suspension and speedometer functioning correctly, both the stock diameter and width of the wheels and tires needs to be maintained. As a general rule of thumb, it’s safe to fit a tire up to 20 millimeters wider than stock on the original rim.