- How do I find my rim size?
- What is my wheel offset?
- How wide is an 8j rim?
- How do I check my PCD flange?
- How wide is 8.5 J?
- What is JJ in rim size?
- How wide is 7.5 J?
- How do I know if rims will fit my car?
- How do I know my alloy wheel size?
- How do I find my wheel offset?
- What does 6.5 J mean on wheels?
- What is PCD on a wheel?
- What does 7.5 J mean on wheels?
- How do you know if a PCD has 3 holes?
- Are all 5 stud wheels the same?
- What rims will fit my car?
- What does the J mean on a wheel?
- What size tire will fit a 5.5 rim?

## How do I find my rim size?

Locate the stamped size on the back of the hub on the rim.

This is the assigned measured size of the rim, and it is broken into three sizes: diameter, width and bolt pattern.

For example, a 14 by 6 by 4.5 reading on the rim indicates that the diameter of the rim is 14 inches, and it will accommodate most 14-inch tires..

## What is my wheel offset?

The offset of a wheel is what locates the tyre and wheel/rim assembly in relation to the suspension. More specifically, it’s the measured distance between the mounting pad (the mounting surface of the wheel) and the center line of the rim. Sometimes It’s used interchangeably with the term “backspace”.

## How wide is an 8j rim?

205 tyres on 8j rimRim widthMinimum tyre widthMaximum tyre width7.0 Inches195 mm225 mm7.5 Inches205 mm235 mm8.0 Inches215 mm245 mm8.5 Inches225 mm255 mm12 more rows•Oct 12, 2011

## How do I check my PCD flange?

How Calculate PCD (Pitch Circle Diameter) of a Flange?As accurately as you can, measure two adjacent holes using a varniar scale and calculate the PCD; then calculate for-4 holes: multiply by 1.414.8 holes: multiply by 2.613.12 holes: multiply by 3.864.16 holes: multiply by 5.126.

## How wide is 8.5 J?

Equivalency tableRim widthMinimum tyre widthMaximum tyre width8,0 Inches215 mm245 mm8,5 Inches225 mm255 mm9,0 Inches235 mm265 mm9,5 Inches245 mm275 mm12 more rows

## What is JJ in rim size?

J is the most common shape of a rim flange on passenger cars. The letter B appears at the smallest wheel sizes primarily for older car models, with diameters 12″ and 13″ and rim widths up to 5.0″. J rim contour has 17.5 mm high rim flange but B has only a 14 mm. JJ designation is most common on 4×4 and SUV vehicles.

## How wide is 7.5 J?

Tyre overall rolling diameterRim WidthMinimum tyre widthIdeal tyre width7.0 Inches195 mm205 or 215 mm7.5 Inches205 mm215 or 225 mm8.0 Inches215 mm225 or 235 mm8.5 Inches225 mm235 or 245 mm12 more rows

## How do I know if rims will fit my car?

The two easiest ways are to check the sticker plate in your car, it should be located inside the driver side door, or look online for the vehicle specifications for your exact make and model. That should tell you the standard rim size.

## How do I know my alloy wheel size?

Every alloy wheel should have the size on the tyre; you can find this on the outside or sometimes it is stamped on the inside of the alloys or the back of the spokes. Contacting a specialist is a good idea if you are still unsure about what the diameter and width of your alloys is.

## How do I find my wheel offset?

Nearly every wheel has the offset stamped on it somewhere. Typically, the number is stamped on the back of the spokes. It can be cast into the face, stamped into the barrel, or even printed on the outside of the barrel. If a wheel doesn’t have the offset clearly stamped, it can be easily measured.

## What does 6.5 J mean on wheels?

When you’re looking into the sizing of alloys you’ll see it shown like this: 15 x 6.5J. The first half (15) is your wheel diameter, simple enough, while the second half (the 6.5J) is the wheel width. By width we mean the section between the mounting flanges on the wheel.

## What is PCD on a wheel?

The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes. The easiest way calculate the PCD is as follows: 1) Measure the distance ‘S’ between two adjacent studs from the centre of each hole.

## What does 7.5 J mean on wheels?

The wheels width is usually written beside the flange shape marking – e.g: 7j, 7.5j, 8.0j. The width of the wheel is basically the area shown on the photo above and it is measured in inches. In other words, the bigger the number, the “thicker” your wheels are.

## How do you know if a PCD has 3 holes?

To calculate the P.C.D. of a three stud wheel or hub measure between two holes next to each other (as with five stud below) and multiply by 1.154. The P.C.D. of any wheel or hub with an even number of holes can be measured from the inside of one hole directly across to the outside of the hole opposite.

## Are all 5 stud wheels the same?

Will any 5 stud wheel fit any other 5 stud vehicle? … No, you need to check bolt PCD and wheel offset. You may also need spigot rings, and the bolts need to be the same type (some bolt heads sit at different angles).

## What rims will fit my car?

What Wheels From Other Vehicles Will Fit Your Car?Bolt Patterns. If you want to change the rim on your car, do not ignore its bolt patterns. … Size of the Tire. Before replacing the rim on your vehicle, consider the size of the tire. … Size of the Wheel. … The Wheel Offset. … Find the Bolt Pattern of the Wheel. … Measure the Wheel. … Check the Offset of the Wheel.

## What does the J mean on a wheel?

tyre bead profileThe letter “J” means a tyre bead profile. This is the marking used to define the wheel collar profile you should never ignore. Wheel collars and tyres must be compatible.

## What size tire will fit a 5.5 rim?

Equivalency tableRim widthMinimum tire widthMaximum tire width5,5 Inches165 mm195 mm6,0 Inches175 mm205 mm6,5 Inches185 mm215 mm7,0 Inches195 mm225 mm12 more rows