Quick Answer: What Does 5×112 Bolt Pattern Mean?

What are wobble bolts?

Essentially bolts with a moving taper washer, which can be set to be eccentric to the bolt centre.

In other words, a washer that can wobble.

That is where the “Wobble Bolt” moniker comes from.

Not because they make the wheels wobble..

What is the most common bolt pattern?

In 4 lug, the most common bolt pattern by far is 4×100 mm. The 4×100 mm were used by a majority of car manufacturers, including but not limited to Volkswagon, Audi, BMW, Mini, Toyota and most notably, Honda. For 4×114.

Is 5×4 75 the same as 5×120?

120mm = 4.73″. Its the same thing. If you look at wheel boxes when you buy/sell rims it says 5×120/5×4. 75.

What is the PCD of a BMW wheel?

Early BMW 3 Series models including the E21 and E30 used a 4×100 PCD, while later models switched to a 5×120 PCD which has now become ubiquitous across the BMW range and is popularly referred to as ‘BMW fitment’.

What PCD is a mk4 Golf?

5x100Volkswagen – Golf 4 (1997 – 2003)PCD:5x100Center bore:57.1Offset:38Mounting:Bolt – 14 x 1,50Wheel torque steel:120 Nm / 89 ft-lb2 more rows

Why wheel spacers are dangerous?

Whether it’s because of too narrow of axles or not enough wheel offset, wheel spacers can put your tires and wheels where you want them to be under your fender. So, are they dangerous to use? … Also, by adding wheel spacers you are adding more components, and the more components, the more potential for failure.

Why do cars have different bolt patterns?

It depends on how big the car and how heavy the car is to pick out the bolt patterns to fit the weight of the vehicle. Some light weight cars have only 4 bolts, the pattern is square. If heavier cars, those design engineers would select 5 bolts and 6 bolts for trucks.

What bolt pattern is 5×120?

The 5 X 120 bolt pattern is common to BMW, LAND ROVER, HONDA, LEXUS, BENTLEY, ACURA, CADILLAC and PONTIAC vehicles.

Do Audi and BMW have the same bolt pattern?

I agree those wheels lend themselves to BMW’s but as long as the offset works BMW, Merc, and Audi all have a 5×112 bolt pattern.

Do BMW and Mercedes have the same bolt pattern?

Mercedes wheels are actually a 5×112 and BMW’s are actually a 5×120. 1 to the m6 reps. They will look way better than any mb wheels, and it’s the same basic design. And they won’t make your ride look like a frankencar.

What is a 5×112 bolt pattern?

The 5×112 bolt pattern is mainly associated with Audi, BMW, Mercedes-Benz, and Volkswagen cars. You have your choice of 15”, 16”, 17”, 18”, 19”, 20”, 22”, and 24” sizes for wheels with the 5×112 bolt pattern. … Call us today at 320-333-2155 and order your new wheels with the 5×112 lug pattern.

Does 5×114 fit 5×112?

5×112 and 5×114. 3 are two different sizes and not directly interchangeable.

What’s the difference between 5×100 and 5×112?

Re: difference between 5×100 and 5×112? (jglover4444) 5×112 is a larger bolt pattern, and came on MK V’s, Passats, and B6 and after Audi A/S 4’s. Our bolt patterns are 5×100, and to fit a 5×112 wheel, you will need adapters.

What cars have a PCD of 5×112?

Bolt pattern 5x112Alfa Romeo (1) Alfa 6.Audi (42) … BMW (26) … BMW Alpina (5) … Bentley (5) … Borgward (5) … Brilliance (1) … Chery (1)More items…

Will 5×100 wheels fit 5×112?

5×112 and 5×100 is bolt pattern, an offset number would be +35 or -35. They won’t fit at all unless you get adapters.

Who uses 5×112 bolt pattern?

The 5 X 112 bolt pattern is common to AUDI, MERCEDES BENZ, VOLKSWAGEN, MAYBACH and CHRYSLER vehicles. A full list of vehicle makes and models appears below.

Will a 5×100 fit a 5×114?

adapters will work, 5×100 to 5×114 will allow you to fit 5×114 wheels…and like mentioned above, if you order 15mm or below, you WILL need to either cut your OEM studs or shorten them by replacing them with shorter ones…i think if you go 20mm, youll be fine.

What vehicles have 5×114 3 wheels?

Bolt pattern 5×114. 3Acura (18) CDX CL CL Type-S CSX ILX Integra Integra Type-R Legend MDX NSX RDX RL RSX TL TLX TLX-L TSX Vigor.Alpine (1) A110.Aston Martin (8) Bulldog DB9 DBS DBS Superleggera V12 Zagato V8 Vantage Vantage Virage.BAIC (3) BJ20 M60 MZ45.BYD (9) … Baojun (5) … Changan (7) … Changhe (1)More items…•

What is the PCD of a wheel?

The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes. The easiest way calculate the PCD is as follows: 1) Measure the distance ‘S’ between two adjacent studs from the centre of each hole.

What wheels from other vehicles will fit your car?

Typically, you can swap your rim with the one from another vehicle. However, this depends on several factors such as the size (diameter and width), center bore, offset, and bolt pattern on the respective rims. Overall, both sides should have matching features.