What Cars Have A Bolt Pattern Of 5×112?

What does 5×112 bolt pattern mean?

Bolt pattern or bolt circle is the diameter of an imaginary circle formed by the centers of the wheel lugs.

A bolt circle of 5X112 would indicate a 5-lug pattern on a circle with a diameter of 110mm..

Can BMW rims fit on a Mercedes?

If the bolt pattern is the same they will work. The offset is how far the wheels stick out. So if the offsets are way off the wheels may sit really far out or too far in.

What are wobble bolts?

Essentially bolts with a moving taper washer, which can be set to be eccentric to the bolt centre. In other words, a washer that can wobble. That is where the “Wobble Bolt” moniker comes from. Not because they make the wheels wobble.

What is PCD on a wheel?

The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes. The easiest way calculate the PCD is as follows: 1) Measure the distance ‘S’ between two adjacent studs from the centre of each hole.

Can you put 5×112 on 5×110?

As long as they are torqued up properly they’ll be just like any other bolt, they’ll be fine. It’s only 0.4mm difference in each hole of the pcd between 5×100 and 5×112 anyway so not much.

Will 5×100 wheels fit 5×110?

PLEASE TAKE NOTE, THESE ARE CONVERSION ADAPTERS TO CHANGE YOUR BOLT PATTERN OF YOUR VEHICLE. THESE WILL ALLOW YOU TO FIT WHEELS THAT ARE 5X100 ON A CAR THAT HAS A 5X110 BOLT PATTERN.

How do I know what rims will fit my car?

The two easiest ways are to check the sticker plate in your car, it should be located inside the driver side door, or look online for the vehicle specifications for your exact make and model. That should tell you the standard rim size.

Is 5×100 the same as 5×114 3?

They are both the same, just one is measured in inches and the other is in mm. If you saw an auction for a set of wheels that are 5×100/5×114. 3 this most likely means the wheels will fit both bolt patterns and have 10 lug holes around the center bore of the wheel to allow fitment of both bolt patterns.

Do Audi and BMW have the same bolt pattern?

RE: A4 & BMW bolt pattern same?? I agree those wheels lend themselves to BMW’s but as long as the offset works BMW, Merc, and Audi all have a 5×112 bolt pattern.

What bolt pattern does BMW use?

It’s also known as the PCD (Pitch Circle Diameter). Nearly all BMWs have 5 lug bolts in a 120mm bolt circle. Beginning with the G01 7-series chassis in 2009, all G-chassis use a 5×112 bolt pattern – the same number of lug bolts but in a 8mm tighter circle. This is also the spec used by Audi, VW, and Mercedes.

Will Audi wheels fit a Mercedes?

Offset is 37 mm for Mercedes, 45 mm (I think) on Audis. E-Class is 5×112, however center bore is larger than ours. Our rims won’t fit theirs, but theirs will sort of fit ours. The bolt holes on an E-class are smaller in diameter.

Is 5×100 the same as 5×112?

5×112 and 5×100 is bolt pattern, an offset number would be +35 or -35. They won’t fit at all unless you get adapters.

Do BMW and Mercedes have the same bolt pattern?

Mercedes wheels are actually a 5×112 and BMW’s are actually a 5×120. 1 to the m6 reps. They will look way better than any mb wheels, and it’s the same basic design.

Will a 5×114 3 fit a 5×112?

5×112 Wheels will fit 5×114. 3 applications…

What will 5×120 wheels fit?

Rims with this bolt pattern may fit the following vehicles:Acura (8) MDX NSX RL RLX TL TL SH-AWD TLX ZDX.BMW (27) … BMW Alpina (15) … BYD (10) … Bentley (3) … Buick (7) … Cadillac (9) … Chevrolet (7)More items…•

What is the lug pattern on a Camaro?

Chevrolet Camaro Wheel SizeCamaro Bolt PatternPCD 5×120.70 See AdaptersCustom Offset Range46 to 64 mmCenter bore (hub bore)70.3 Use Hub Centric RingsThread sizeM12 x 1.5 Lug NutsStock Rim Sizes Range16x7.5 – 20×9.5 Hubcaps3 more rows

What cars have the same bolt pattern as Mercedes?

The 5 X 112 bolt pattern is common to AUDI, MERCEDES BENZ, VOLKSWAGEN, MAYBACH and CHRYSLER vehicles. A full list of vehicle makes and models appears below.

Will a 5×112 fit a 5×120?

Full Set Of 5×120 to 5×112 Black Bolt On Hub Centric Conversion Adapters 1″ (25mm) Thickness 72.56/74.1 Hub Bore To 57.1 Wheel Bore Works With 5×120 BMW To Audi Or Volkswagen Wheels 5×112 57.1. Gives your vehicle an aggressive stance & allows for better handling characteristics.