What Does R16 Mean?

Can I use 235 tires instead of 225?

235/45 tires have a sidewall height of 105.75mm.

The 225/45 tires will be shorter and will cause his speedometer to read higher than true.

So short answer: Yes the tires will fit.

They will, however, throw off your speedometer and will make the miles come onto the odometer faster..

What does 60r15 mean?

This number indicates that your tire has a width of 195 millimeters. 60. This number means that your tire has an aspect ratio of 60%.

What cars use p205 55r16?

Such tire size may fit the following vehicles:Acura (7) CL CSX ILX Legend RSX TL Vigor.Alfa Romeo (11) 147 156 159 164 166 Alfa 6 GT Giulietta RZ SZ Spider.Audi (9) 100 80 A3 A4 A6 Cabriolet Coupe S2 TT.BAIC (1) D50.BMW (6) 1 Series 2 Series 3 Series 6 Series M1 Z4.BYD (8) … Baojun (2) … Brilliance (6)More items…•

What’s the difference between a 205 and a 215 tire?

The diameter of the 205 is 26.3 inches and for the 215 the diameter is 26.7 inches. That is 0.4 inches of difference meaning that it would raise the height of the trailer by 0.2 inches. … This will not only help with the height but also help to prevent over heating which is why many trailer tires fail.

What does 88h mean on a TYRE?

Step 3. Decode the information. For example, P 185/65 R15 88H would be deciphered in this way: P stands for the tire type, in this case a “passenger” rated tire. The 185 is the width of the tire in millimeters measured from the bottom of the bead on one sidewall to the other.

What does p205 55r16 mean?

This number indicates that your tire has a width of 205 millimeters. 55. This number means that your tire has an aspect ratio of 55%. In other words, your tire’s sidewall height (from the edge of the rim to the tire’s tread) is 55% of the width. In this case, the sidewall height works out to be 112 millimeters.

What tire numbers mean?

The two-digit number following the slash in the tire size description is the tire’s aspect ratio. It is the sidewall height expressed as a percentage of the tire’s width. If the markings say 255/55R18, it means that the height of the sidewall is 255 multiplied by . 55, or 140 millimeters.

What does the R mean in tire size?

radial constructionP identifies your tire as a Passenger Tire. … R indicates the construction used within the tires casing. R stands for radial construction. B means belted bias and D stands for diagonal bias construction. 16 The last dimension listed in the size is the diameter of the wheel rim, which is most often measured in inches.

What does r16 mean on a tire?

The number 235 is the cross-section width in millimeters, while 70 is the ratio of sidewall height to cross-section width (70 percent). R means radial-ply construction and 16 is the wheel diameter, in inches. Load index. This number is based on the weight the tire can safely carry.

What’s the difference between 265 75r16 and 265 70r16?

Going from 265/70 to 265/75 is increasing the height, or diameter, of the tire. The tire will be an inch taller. 265 is the width, so stock size is 265 millimeters wide. The speedometer will be a little off because the taller tire does not rotate at the same speed as the stock size.

What speed rating is S?

Speed RatingL75 mph120 km/hQ99 mph160 km/hR106 mph170 km/hS112 mph180 km/hT118 mph190 km/h6 more rows

What does P mean on a tire?

passenger vehicle tireP stands for passenger vehicle tire. P-class tires include cars, SUVs, crossovers, minivans and smaller pickup trucks. LT means light truck tire, designed for vehicles that are towing trailers or have ¾- and 1-ton load capacity.

What does XL mean on a tire?

extra load tiresThey can carry heavier loads than tires of the same size. Reinforced tires are designated on the sidewall by the letters “RF”; extra load tires with the letters “XL.” Reinforced and XL tires require higher inflation pressures than standard tires.

Can I use 225 tires instead of 205?

The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 6 inch to 7 inch. The 205 is 27.1 inches tall and the 225 is 28.4… … You can certainly change your trailer tires to a narrower 205mm width as long as your wheels are 6- or 6-1/2-inches in width.

What does r17 on a tire mean?

R stands for radial construction. B means belted bias and D stands for diagonal bias construction. 17 The last dimension listed in the size is the diameter of the wheel rim, which is most often measured in inches. LOAD INDEX AND SPEED RATING. Example: P225/50/R17 98H.