What Is The Difference Between 3.42 And 3.73 Gears?

What gear ratio should I use for 33 inch tires?

So if our truck had 30-inch tires stock, and a 3.73:1 axle ratio, that calculation would tell us we need a 4.103:1 (which rounds off to the readily available 4.10:1) gear ratio to get us back to stock with 33-inch tires..

Can I tow with a 3.23 gear ratio?

The 2019 Silverado is available with either a 3.23 or 3.42 rear axle ratio. While the 3.23 axle ratio provides both strength and reliability, the 3.42 ratio is what you need for rugged capability and maximum towing capacity. The 3.42 axle ratio is either standard or available through the Max Trailering Package.

Are 4.10 gears good for highway?

Installing 4.10 gears improves the car’s performance on the track but with negligible effects to the highway driving. If your car is equipped with an overdrive, you may not even notice a difference in gas mileage with the new higher gearing.

Does 3.73 gears make a difference?

Yes, while it’s a noticeable improvement in seat of the pants acceleration, you will run out of rpms quicker with 3.73s. In the long run you’ll find yourself looking for more engine rpms. The increased torque multiplication of lower gears will help make better use of a higher revving engine combo.

Are 3.73 or 4.10 gears better?

Use this rule of thumb: The higher the gear ratio, the easier it is to get the vehicle moving and better accelerating, but lowers top speed. Vice versa, if the gear ratio is lower it has worse acceleration but a higher top speed….WHICH GEAR RATIO IS FOR YOU?3.73 RATIO4.10 RATIOHigher top speedLower top speed3 more rows•May 12, 2020

What is the best gear ratio for speed?

4.10:1In the real world, typical street machines with aspirations for good dragstrip performance generally run quickest with 4.10:1 gears. Lower gears are required if the car is very heavy, or if the engine makes its power at the upper end of the rpm scale.

Are 3.73 gears good for highway?

Rear end gears (2.79’s, 3.00’s, 3.25’s, etc) are great for freeway driving, bit not good for 0-60 MPH or accelerating from a dead stop. Shorter gears (higher numbers) are much better suited for accelerating, such as 3.55, 3.73, 3.91’s, 4.11’s etc. Always remember, for very “give” there is a “take”.

Is a 3.42 gear ratio good?

Lower numeric axle ratios may help reduce how much an engine has to work while cruising at highway speeds, and can potentially help improve fuel economy. … For instance, the 3.42:1 ratio included on many Canyon V-6 and Sierra 1500 models offers a good all-around blend.

Is a 3.42 axle ratio good for towing?

Two common base axle ratios for trucks are 3.08 and 3.42. A 3.73 ratio is suitable for regular light towing. If you plan on towing a fifth-wheel trailer or anything heavier than 5,000 pounds, you should consider a 4.1 axle ratio. A 4.1 ratio allows a towing vehicle to start moving without as much throttle.

What are 3.73 gears good for?

A numerically higher axle ratio provides a mechanical advantage to send more of the engine’s available torque to the rear tires (and front tires, in a four-wheel drive vehicle), but you pay the price at the fuel pump. So, a truck with optional 3.73 gears will tow a heavier trailer than one with 3.55 or 3.21.

What is a good gear ratio for a street car?

If it’s a daily driver, chances are you’ll want to keep your gear ratio at 3.23 or below for optimal performance and lower cruising RPMs. For street and strip applications, a popular choice ranges between 3.42s and 3.90s, giving you that extra oomph on the track while maintaining a tolerable cruising RPM on the street.

How does gear ratio affect gas mileage?

Gear Ratio Effect The effect is generally minimal and will account for less than a single mile per gallon, and typically the gains are generally seen at highway speeds. … The transmission gearing directly affects the fuel economy at a given speed. The engine’s rpm and fuel consumption are generally lower in higher gears.

Is 3.42 or 3.73 better?

The 3.42 is fine for towing smaller boats, plus you will get better gas mileage for everyday driving. If I were towing frequently on hilly roads, I might would go for the 3.73 for better gas mileage while towing, but the 3.42 should be fine with a 205.

What gear ratio is best for fuel economy?

The lower the number, the better fuel economy, and the higher the number the more towing power you have, but fuel economy suffers. For instance, a 3:31 gets better fuel economy than a 3:73. On the other hand, a 3:73 or perhaps a 4:10 will tow much more, while fuel economy greatly drops.