Will 4.10 Gears Make My Car Faster?

What are 4.11 gears good for?

4.11:1 is a “lower” gear ratio, meaning you have more torque, lower top speed, and you will generally consume more fuel.

Usually people put 4.11:1 gears in trucks to be used off-road for the extra torque and the better “crawling” capabilities..

Do gears make car faster?

The simple answer is yes. More aggressive gearing creates a quicker car but not a faster car. A gearing change will have a noticeable affect on your car. If you swap in taller rear gears, you can gain some top-end speed, making your car faster, but you’re going to be a bit slower leaving from a stop.

Which gear ratio is faster?

The higher the number the better the car will accelerate, but at the expense of high speed cruising. Now for the confusing part of the story. A high numerical gear ratio is called a low gear or low rear end, and vice versa. Low gears give fast acceleration, high gears give better cruising.

Does gear ratio affect horsepower?

It doesn’t affect horsepower or tourqe at all. Gears make your rear tires turn faster or slower. It also effects your top end speed and milage. The reseaon you dyno in 4th gear is becouse its a 1-1 ratio.

How much does it cost to get 4.10 gears installed?

Installation costs will vary, but a good rule of thumb is between $250 and $300. Be sure to work with a reliable shop that you trust for installations. You can also save money on your installation labor by having your Trac-Lok rebuilt at the same time as your gears are installed, see drop down option above.

What gear ratio is best for fuel economy?

The lower the number, the better fuel economy, and the higher the number the more towing power you have, but fuel economy suffers. For instance, a 3:31 gets better fuel economy than a 3:73. On the other hand, a 3:73 or perhaps a 4:10 will tow much more, while fuel economy greatly drops.

What is a 5 to 1 gear ratio?

For example, if a motor drives a 12T gear to a driven 60T gear on an arm, the 12T driving gear has to rotate 5 times to rotate the 60T driven gear once. This is known as a 5:1 ratio. The torque output is 5 times as much, however, the speed output is only 1/5.

Are 3.73 or 4.10 gears better?

Vice versa, if the gear ratio is lower it has worse acceleration but a higher top speed. So, by changing your gear ratio, no power levels are being changed, just the torque….WHICH GEAR RATIO IS FOR YOU?3.73 RATIO4.10 RATIOBetter gas mileageWorse gas mileageHigher top speedLower top speed2 more rows•May 12, 2020

Are 3.73 gears good for highway?

Well, if you plan on doing a lot of freeway driving, you don’t want to choose a gear that’s too low for your car because you’ll be going down the freeway at too high of an RPM. … Shorter gears (higher numbers) are much better suited for accelerating, such as 3.55, 3.73, 3.91’s, 4.11’s etc.

WHAT WILL 4.10 gears do?

Installing 4.10 gears improves the car’s performance on the track but with negligible effects to the highway driving. … Switching from a gear set of 3.55 or 3.73 to 4.10 gears will affect your gas mileage slightly as your engine will be turning more times to rotate the rear wheels once.

What is the difference between 3.73 and 4.10 gear ratio?

The ratio is the number of teeth on the driven gear (ring) divided by the number of teeth on the drive gear (pinion). … So for gear ratio of 3.73, for every one turn of the ring gear, the pinion will turn 3.73 times and for gear ratio of 4.10, for every one turn of the ring gear, the pinion will turn 4.10 times.

Does 3.73 gears make a difference?

Yes, while it’s a noticeable improvement in seat of the pants acceleration, you will run out of rpms quicker with 3.73s. In the long run you’ll find yourself looking for more engine rpms. The increased torque multiplication of lower gears will help make better use of a higher revving engine combo.

Does higher gear ratio mean faster?

A lower (taller) gear ratio provides a higher top speed, and a higher (shorter) gear ratio provides faster acceleration. . Besides the gears in the transmission, there is also a gear in the rear differential.

Is 3.55 or 3.73 gears better?

3.55 will give you a little better gas mileage on the highway and slightly more highway oriented performance. 3.73 may be better for towing, lower end power (off the line acceleration), and may result in worse gas mileage on the highway.

What is the best gear ratio for 35 inch tires?

Depending on the axle, the next lowest ratio from a 4.10:1 is most likely the 4.56:1, which should be selected for towing and performance. Because of the extra weight associated with off-road tires, we usually recommend going with a performance-minded gear ratio for any tire size above 35 inches.

How fast can you go with 4.10 gears?

On the highway a 4.10 gear will only be about 200 rpms more at around 75 then a 3.73. And with the Automatic you will need all the help you can get. Top Speed of our GT’s should be between 145 and 155 depending on the tune of your chip if you have one.

Is a 4.10 gear ratio good?

FACT: A 4.10 axle ratio is ideal for towing heavy loads in a mix of city and highway driving and when towing on varied or steep grades. A 4.10 axle ratio will provide improved acceleration in stop and go city traffic.

Is 3.42 or 3.73 better?

The 3.42 is fine for towing smaller boats, plus you will get better gas mileage for everyday driving. If I were towing frequently on hilly roads, I might would go for the 3.73 for better gas mileage while towing, but the 3.42 should be fine with a 205.